Product Details
＋Z-WAVE GARAGE FOR LESS
Make your garage smart with minimal effort and cash. Just attach the tilt sensor to your garage door and connect the ZEN16 to your existing door switch on the wall. You can control up to 3 doors with a single ZEN16 independently (but you'll need to get additional sensors to monitor them). Scroll down to the "Works with" section for dedicated hub instructions.
IN THIS PACKAGE:
ZOOZ S2 MULTIRELAY ZEN16 VER. 2.0
You don't need to touch any wiring at the garage opener. Just take the 2 wires from the door switch and attach them to the R1 terminals on the ZEN16. Connect the switch to the Sw1 terminals with another 2 wires, power the ZEN16 up and you're all set. Please make sure your existing opener doesn't have any smart or electronic features and is controlled by a simple momentary wall switch before buying.
ZOOZ 800 SERIES Z-WAVE PLUS TILT | SHOCK SENSOR
WORKS WITH
- (recommended for Zooz products)
- Fibaro Home Center 2
- ()
- Home Assistant
- Hubitat works best with
- ISY
- openHAB (2.5.1 or higher)
- SmartThings Hub ()
- with this
- with this
- with this
NOTE: If you don't see your Z-Wave controller on the list above, please before you purchase this kit.
GET POWER SUPPLY
DC:OR USB:
